FOR ALL STANDARDS WORLDWIDE.
Our objective: To make complex charging processes easy to analyse and test!
The comemso Analyzer / Simulator solutions measure and verify both the communication and the load circuit on standard-conformity over the complete duration of charging and records all deviations. Thus causes of charge interruptions can be identified and causalities of events can be detected and visualised.
The comemso EVCA Multi Mobile is an absolute world novelty in the field of EV charging system analysis. It combines the four most common charging standards AC/DC-CCS Type 1 + Type 2, CHAdeMO and GB/T China in one system. Directly ready for use without prior plugging and replacing of inlets or similar! All this is done in accordance with the latest standards. For DC-CCS Type 1 + Type 2: IEC 61851-1, DIN 70121, ISO 15118 and SAE J1772; ISO/IEC 61851-23 measurement and ISO/IEC 61851-24 without faults on DC load circuit. For CHAdeMO: 0.9.1, 1.0, 1.0.1, 1.1, 1.2 and 2.0. For GB/T DC (China): GB/T 27930-2011; GB/T 27930-2015 and GB/T 18487.1-2015.FW/SW REFER
The AC analysis is performed according to IEC 61851-1, SAE J1772 and GB/T 18487.1-2015 Annex A (AC). The DC analysis is performed according to IEC 61851-1, DIN 70121, ISO 15118, SAE J1772 and IEC 61851-23 Annex CC.
The analysis is performed according to CHAdeMO (DC) Revision 0.9, 1.X & 2.0.FW/SW REV. 1.8.1
The analysis is performed according to GB/T 27930-2011 and 27930-2015.FW/SW REV. 2.9.0
The combined Mini-Charger-Tester simulates vehicle signals of the charging standards DC-CCS and CHAdeMO, virtually two vehicles in an ultraportable suitcase.
This small power package can be used at the service application and maintenance.
The Man-in-the-Middle function allows you to monitor the wireless charging communication between EV coil and ground coil. The analysis is performed according to SAE J2954 JSON.