SIMULATION OF TWO DIFFERENT EVs
CCS OR CHAdeMO
AUTOMATIC EV SIMULATION
FOR COMMUNICATION & DC LOAD CIRCUIT
REAL TIME RESULTS
SAVED IN THE DEVICE
SAFETY TESTS FOR
PE BREAK, CP SHORT CIRCUIT, LEAKAGE CURRENT
TOUCH INTERFACE
NO COMPUTER REQUIRED
PORTABILITY
WITH WHEELS & CARRYING HANDLE
The new challenges of electric mobility
The number of charging stations in the field is increasing and with it the service effort. In order to verify that a charging station is charging properly and that nothing has been forgotten during (re)commissioning, a final functional test is mandatory after every maintenance or repair. This requirement has created many new challenges for charging station manufacturers and EVSE operator, as in the past one or two real electric vehicles, each with different charging standards, were needed to test charging stations. In addition, in the event of a malfunction, the service technicians found it difficult to identify the causes in a simple manner.
We have developed a solution for this: The comemso Mini-Charger-Tester simulates vehicle signals, communication protocols and load circuits of the charging standards DC-CCS, CHAdeMO and, if required, also AC. In this way, we have effectively put two “vehicles” in one ultra-portable, easy-to-use case. The results are displayed in real time on the touchscreen and additionally stored in the device as a report.
By using comemso Mini-Charger-Tester you ensure that your infrastructure of EVSEs is working properly and safe, does cause no defects, provides fast charging and makes sure that there is accurate billing for you as well as your customers.
HIGHLIGHTS OF MINI-CHARGER-TESTER
Charging station test with logged reports and automatable if required. For DC-CCS, CHAdeMO & AC.
COMBINED MINI-CHARGER-TESTER
FOR FIELD
DETAILS
If you search for a device that is made for transportability and use on-site, the combined Mini-Charger-Tester is the natural choice. The device simulates vehicle signals of the charging standards DC-CCS and/or CHAdeMO, so it represents virtually up to two vehicles in an ultraportable suitcase. This small power package is perfectly suited for maintenance, testing after commissioning / installation and shows you the test results (passed/failed) clearly on its touch display. Furthermore there are features like failure injection, set charging time, etc. The device is generally operated via the touch display. With the associated PC software, all test results can be transferred to your PC as a PDF.
Latest Software / Firmware:
Rel_31.07.00
DOWNLOAD
click for download
COMBINED MINI-CHARGER-TESTER EOL
FOR END-OF-LINE-TEST
DETAILS
In case your focus is on End-Of-Line (EOL) testing in production you should opt for this tabletop version: it‘s designed to be operated with an End-of-Line test bench to find out if the EVSE is working as expected. Of course the tabletop can as well be used in field just like the suitcase version, yet with the Mini EoL you combine most advantages of the suitcase with additional features like continuous EoL-testing for up to 8 hours per day under laboratory conditions, adjustable charging time from a few seconds to max. 60 minutes as well as automated charging tests.
Latest Software / Firmware:
Rel_31.07.00
DOWNLOAD
click for download
COMBINED MINI-CHARGER-TESTER EOL HPC
FOR END-OF-LINE-TEST WITH HIGH-POWER-CHARGING
DETAILS
Your demands are even higher? If your focus is on End-Of-Line (EOL) testing with high power charging, the Mini-Charger-Tester EOL HPC can still be installed in a single, rollable rack for loads of up to 120 kW. If you need even a higher DC battery emulation for testing the maximum performance of your EVSE you can extend your system using battery emulators to reach DC-loads of up to 500kW 1000V/500A. Please talk with our sales team to select the fitting battery emulation / bi-directional power supply. Like the tabletop version, this rack version is also designed for continuous operation of up to 8 hours per day under laboratory conditions.
Latest Software / Firmware:
Rel_31.07.00
DOWNLOAD
click for download
“As a product-independent full-service provider for sustainable charging systems, comemso not only convinced us because of their market establishment, but above all because of the manufacturer-independent application options. In this way, we can guarantee our customers quick service calls and feedback on the reliable functioning of their charging points.”
“We´ve been using the comemso Mini-Charger-Tester to test our hyper-fast charging, and we´re impressed by the ease of use, stability and precision of the compact solution.”
“Comemso offers innovative solutions to the industry, offering support and a quality product. Highly recommended!!”
“Fantastic piece of testing kit.”
Up-to-date
with software and firmware
Here you will find important updates for your comemso products.
Automatic EVSE testing after installation/ maintenance.
comemso Mini-Charger-Tester. DC-CCS, CHAdeMO
Synfis relies on comemso Mini-Charger-Tester
Are you interested in a Mini-Charger-Tester? We will create a suitable offer for you.
Are you interested in our solutions? Send us a message. We are happy to help.
Elektroinstallation und Ladeinfrastruktur der Elektromobilität.
(comemso is referenced on page 350)
VDE-Verlag
ISBN 978-3-8007-6079-4
Elektromobilität. Theorie und Praxis zur Ladeinfrastruktur.
(comemso is referenced on page 232)
Hüthig-Verlag
ISBN 978-3-8101-0508-0
Charging Analysis
Accelerate your ev charging tests and evse tests in laboratory, emc chamber or in the field […]
Battery Cell Simulation
Benefit from one system for different BMS testing applications: From BMS development and validation to […]
E-Learning portal
Video training sessions on the functionality of our products. We will provide you with expert assistance […]
DAKKS Accreditation
With immediate effect, comemso eMobility Services GmbH has an accredited calibration laboratory […]