comemso
Find the right system
Talk to application engineering
Start with the decisionApplications
Vehicle and charging station
EV TestingVehicle, EVCC and charging-release validation.EVSE TestingCharging-station development through field operation.InteroperabilityReal EV and EVSE in one synchronized test record.
Battery and advanced charging
BMS TestingCells, sensors, balancing and controlled faults.BMS + EVCC + OBCValidate the interaction of battery, charging controller and on-board charger.MCS TestingCommunication, signals, cooling and megawatt power.EV Charging EMCKeep charging communication observable under EMC stress.
Production and field
EVSE End-of-LineRepeatable acceptance and unit-level results.Commissioning & Field ServiceCommission, diagnose and verify installed chargers.Calibration & MetrologyTraceable energy verification at the charging point.
Start with the decisionProducts & PlatformsFind the right system
EVCA
EVCA PlatformCommunication, interoperability, high-power, MCS and EMC paths.EVCA ComOnlyFocused charging communication testing.EVCA Multi MobilePortable laboratory and field analysis.EVCA InteropAnalyse interoperability between a real EV and EVSE.EVCA FlexModular high-power testing and controlled faults.EVCA MCSMegawatt charging communication, low-level signals and system testing.
Easy Chester
Easy Chester PlatformEVSE production, commissioning, service and calibration.Easy Chester MicroAC EVSE installation testerEasy Chester UltimateAC and DC EVSE installation testerEasy Chester CalimeraAC and DC EVSE calibration systemEasy Chester EOL / EOL HPCEVSE end-of-line production tester
Battery, software and EMC
Battery Cell SimulatorBMS testing from compact bench to high-voltage HiL.comframeConfiguration, synchronized analysis and automation.EMC LinkOptical charging communication through the chamber boundary.
Start with the decisionSoftware Capabilities
Understand and challenge
Automated Standards AnalysisMeasured behaviour, normative context and highlighted deviations.Professional SimulationConfigure nominal, boundary and non-conform behaviour.Manipulating GatewayTest a live correction hypothesis between real partners.
Reproduce and automate
Charge PlaybackReproduce the charging partner for the DUT.Charge Cycle AutomationTurn saved configurations into repeatable campaigns.Conformance Test LibrariesVersioned executable standards-based test logic.
Software and integration
Capabilities HubConnect the capability model across EV, EVSE and BMS testing.EVCA Capability HubExplore the detailed EV charging capability stack.comframeThe shared test-intelligence environment.Integration & APIsREST, Python, CI/CD and laboratory orchestration.Protocol & Domain ModulesSelect released domain depth.
Start with the decisionStandards & Knowledge
Standards and test logic
Charging, Safety & EMCCharging behaviour, field safety, editions and test boundaries.Conformance Test LibrariesReleased executable test logic, verdicts and evidence.AFIR for EV ChargingRegulation, responsibility and verifiable evidence.
Methods and terminology
Knowledge CenterTechnical explanations, methods and application guidance.GlossaryStable charging and BMS test terminology.EVSE Calibration MethodsCompare controlled real load and reference measurement.Battery Cell SimulationCells, balancing, faults, precision and BMS HiL.
Documents and tools
Resources LibraryCurrent brochures, webinars, guides and checklists.Charger Uptime CalculatorEstimate downtime and field-service impact.EVSE Inspection GuidePractical commissioning and inspection workflow.BMS testing whitepaperTemperature, environment, simulation and test wiring.Technical newsletterChoose product updates and events relevant to your tests.
Start with the decisionCompany
Company
About comemsoEngineering purpose, history and operating companies.Development & manufacturingShort paths from development to system testingQuality & CertificationsManagement systems, validation and calibration evidence.Customer ProofNamed stories, endorsements and published configurations.SustainabilityEnvironmental management and measured progress.
People and network
Customer Care TeamDelivery, commissioning, training and support.Sales PartnersRegional commercial and service access.CareersWork on deep e-mobility testing.
Updates and contact
News & EventsProjects, releases, webinars and company updates.Request a technical demoDiscuss your test task with the comemso team.ContactSales, support and locations in one place.Legal documentsImprint, privacy, GTC, EULA and WEEE.
Event & webinar21 April 2026

Webinar archive: Commissioning and inspection of charging stations

A practical live webinar for electricians and field teams focused on EVSE functionality, electrical safety and repeatable inspection methods.

Read articleAll news & events
Webinar archive: Commissioning and inspection of charging stations
Known counterpartTest without a customer vehicle
Guided workflowRepeatable checks for technicians
Defined boundaryFunction, safety or metrology by product
Documented resultKeep the inspected-unit record

Commissioning and inspection require a method that connects visual checks, electrical safety, charging communication and documentation.

At a glance

  • Live event on 21 April 2026
  • Practical inspection workflow
  • Electrical safety and function
  • Live demonstrations and questions

Why this mattered

A charging station can appear operational while still containing electrical, communication or configuration issues. A repeatable field process reduces omissions and makes the result easier to document and hand over.

The system approach

The webinar combined standards context with live demonstrations and practical guidance for commissioning, maintenance and repair. It was offered in three English and German sessions.

What the project shows

This webinar has ended. Explore current guidance on charging-station commissioning and inspection.

Related reading

Continue through the archive.

Related entries retain the publication date and lead to the current technical route.

Event & webinar30 June 2026

Webinar archive: EVSE testing under control. IEC 61851-23 and beyond

A live webinar with UL Solutions connected IEC charging requirements with a practical DC-CCS testing approach.

Event & webinar1–2 April 2025

Accelerating megawatt charging: comemso at the CharIN MCS Controller Testival Europe

comemso supported the CharIN MCS Controller Testival Europe in Barcelona as an official sponsor and early MCS test-system contributor.

Customer story2026

Customer success story: CMI brings charging-station calibration into the field

The Czech Metrology Institute integrated Easy Chester Calimera into a service vehicle for traceable AC and DC charging-station verification on site.

Field workflow planning

Choose the tool from the service question.

Describe the installed EVSE (electric vehicle supply equipment, or charging station), required check, site conditions and result format.

Configure your test systemContact application engineering